Where To Buy Fein MultiMaster FMM 250Q Top

The Fein MultiMaster does not belong in the home workshop or in the DIYer tool bag. This is a serious tool for contractors. I waited 2 years to buy this tool, always finding better uses for the $400. Another reviewer said that only contractors who can pass on the cost of this tool need this tool, he is right, to a degree. I was called to a home that had failed the CO inspection, 28 electrical boxes were partially covered by wood wainscoting. Short of removing the wainscoting, I shelled out the cash for a Fein. Snapping on the multi-blade and firing up the tool, I immediately smiled. It soon became an extension of my hand, I felt like an artist gliding through the house, neatly trimming all the boxes with no worry about hitting the wires or plastic boxes. The control, the dexterity, the power, the finesse! I never felt this with my trusty old roto-zip, it always seemed like it one slip away from disaster. Not so with the Fein.
That was 6 months ago. Since then, I have spent about another $400 on blades with no regrets. The Fein seems to come out of its cheap, clunky, ill-fitting case at least 2 or 3 times a week. Sure, there are times when another tool could do the job but none will put a smile on your face like the MultiMaster. The quality is amazing, German engineering, and all that. What this tool can do is only limited by your imagination. The more you use it, the more comfortable and confident you become with it. I have used this tool to remove grout from marble floor and ceramic tile walls, plunge cut into a 6x6, trim doors, set strike plates, cut nails & bolts, remove glazing from 100-year-old windows, cut out deteriorating masonry, and so much more.
The replacement blades are expensive but they last. The knock-offs don't hold up as well as the originals and the balance is not as good, but if you have a FNG using the tool, they are a good buy. In the hands of an experienced used, the originals are the only blades that give you the precise control that you become accustomed to.
Yes, I pass along the cost of this tool and the blades to my clients, but I also pass along the labor savings that this tool brings. When I compare the two, my clients come out way ahead. A wise investment for any contractor!
Get more detail about Fein MultiMaster FMM 250Q Top.

Shop For Fein MultiMaster FMM 250Q Top

the video looks good, but i used it to cut plywood subflooring -- after cutting 1 foot the blade came apart at the spot-welds. A replacement blade costs $57. $57/foot is very expensive. Simply stated, this is a toy, not intended for anything like serious work.Get more detail about Fein MultiMaster FMM 250Q Top.

Order Fein MultiMaster FMM 250Q Top

Fein MultiMaster FMM 250Q Top

I purchsed this tool in June 2008, it has paid for itself in the time I have had it. I installed some Real Wood Laminate Flooring and it certainly was a time saver when I used it to trim the bottom of the trim around door openings in the room, and also when it came to removing old nailed on 1/4 round trim attached to Base Board in the room, I say this because this tool; with right blade installed; will cut right through old nails. I have also used it to make small vertical opeings in Cabinet Door edges to install new Hidden Hardware. I am extremely pleased with this tool. It is a must for the Professional Tradesman/wood worker or even the DIY. This tool is extremely well made, and well worth the Money. I rate it 5 stars.Get more detail about Fein MultiMaster FMM 250Q Top.

Purchase Fein MultiMaster FMM 250Q Top

I am a remodeling contractor who like most debated buying this tool for quite some time. Now that I have purchased it and used it for about three months I have a few observations.. Like everyone I agree the case is junk for the reasons listed in other reviews, the blades are exspensive agreed use them carefully, The cord length like 10+ ' is great , variable speed function is great. All in all a well thought out and heavy duty tool. You will not believe once you get this and realize what it will do what a time saver this thing is just incredible. If you are a contractor get it you wont regret it. I will end on this scenario. Lets say you are working on a house with Hardisiding, the homeowner needs a light installed on the exterior you need a trim block cut into the siding install the carbide round wheel and cut right through the hardi siding no pulling and reinstalling of siding. Very happpy with the purchase.Get more detail about Fein MultiMaster FMM 250Q Top.

Buy Fein MultiMaster FMM 250Q Top

Anyone but a contractor that can pass the cost onto the customer, must have nothing better to do with their money than to blow it on this outrageously priced tool. Don't be a fool. $400 or $500 could buy you a lot more than a glorified detail sander with "cute" attachments. Your choice.Get more detail about Fein MultiMaster FMM 250Q Top.

Discount Fein MultiMaster FMM 250Q Top

Pros.. The tool is well balanced and well designed with very high quality materials.
Pros.. It's a great specialty tool that will eliminate the very painful hands resulting from scraping and removing grout in the future.
Pros.. The motor is much quieter than a popular red belt driven dirt vac. Hearing protection is recommended though.
Pros..Upon opening the package I noticed right away that the power tool was clean and didn't smell like oil or kerosene. Many cheap imported power tools smell that way.
Cons.. The plastic case is huge and will store easily under the bed if your paranoid and feel like guarding it.
Cons..The plastic case design may lack sufficient storage space if you plan to purchase additional accessories. This high qaulity power tool deserves better than the plastic egg carton style tray and can be easily replaced with foam.
Pros.. This high quality power tool fits great in a 20" steel toolbox lined with high density foam.
Cons..Yes cutters and accessories are a little expensive.
Pros..I didnt buy the fancy pivoting $49 hobby tool stand for it.
Instead I drilled and tapped 1/4" 20 TPI holes in 2 old junker pillow blocks then bent a 1" wide x 1/2" thick flat steel into an L shape drilled a 5/8" hole in it. Next attatched bolted (dont own welder) a 3/4" x 1/4" width reducing bar drilled with two 1/4" holes 1/4" from the edge and spaced holes 15/16" apart then ground a slight concave area inbetween the holes.
Pros..The money spent on genuine cutters will most likely help the manufacturer research and design other great quality products just like this one in the future.
Get more detail about Fein MultiMaster FMM 250Q Top.

Cheapest Fein MultiMaster FMM 250Q Top

I bought this tool after I began refinishing some painted woodwork. I got the full kit primarily because it came with the sanding and vacuum attachments. That was a mistake. The sanding attachments are clever, but won't work with paper-backed sandpaper. The paper doesn't hold up. Five small squares of cloth backed sandpaper are included (three different grits), but it's hard to find cloth backed sandpaper later. So I've made little use of the sanding attachments to this point. I also haven't used the vacuum attachment because it's critical to keep the sanding triangle level to the work, else the edges can easily dig into the surface. Adding the vacuum attachment and dragging a stiff hose makes it very difficult to keep the device level.

On the positive side, the sanding action is excellent. This is my first hook-n-loop sander and I'm sold on this type of sandpaper. My only complaint is the very high cost of Fein replacement pads. I'm investigating buying sandpaper in 4.5" rolls and cutting my own pads. I figure I can cut the paper cost by 2/3 that way.

Net net, the tool is excellent but buy it first and then get only the attachments you need after verifying that the attachment works and holds up in your situation.

Edit #1: Just used the metal cutting attachment to cut through a chrome flange around a pipe to make room for a pipe wrench. The multimaster did an excellent job. Clean, fast cut. No damage to anything else, no hassle with hacksaw or trying to "tear" flange off with channel-locks.

And be SURE to get one of those sanding disk/belt cleaners, the oversized art gum erasers. They REALLY help lengthen the life of the sanding pads.Get more detail about Fein MultiMaster FMM 250Q Top.

Cheap Fein MultiMaster FMM 250Q Top

I had purchased the Fein Multimaster for my husband, the best price was from Amazon. My husband loves this tool does everything it is supposed to do. The Fein Multimaster arrived more quickly then we expected just love it and the service from Amazon. Get more detail about Fein MultiMaster FMM 250Q Top.

Buying Fein MultiMaster FMM 250Q Top

This tool is a remnant of the days when quality was most important.
They did not even cut corners on the cord. It is very long and very flexible. The cord was long enough for me to run it thru windows to plug in while working on the roof.
I used it to trim wood for a perfect fit in otherwise inaccesible spots. It cut nails under siding like butter.
I would have given it 5 stars except for the price.Get more detail about Fein MultiMaster FMM 250Q Top.

Save Fein MultiMaster FMM 250Q Top

My cousin let me borrow his and I was hooked. I bought one specifically to help with installing some replacement windows. The e-cut blade was superior to a reciprocating saw or hacksaw for cutting through nails to remove trim. You don't have to worry about it plunging farther than you want. Scraper blade removes caulk with almost no effort.

You'll find countless uses for it, especially if you have an old house like me.Get more detail about Fein MultiMaster FMM 250Q Top.

Low Price Fein MultiMaster FMM 250Q Top

The MultiMaster is all that it is advertised to be and even though there were a couple of mix ups with my order the company I ordered from was outstanding with their customer service.Get more detail about Fein MultiMaster FMM 250Q Top.

Lowest Price Fein MultiMaster FMM 250Q Top

This if a great tool, it works just like it was shown on tv. Perfect for what would otherwise be tricky cuts. I have found many uses for it.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Right now

I was faced with removing about 12,000 linear feet of improperly installed grout on a limestone tile floor. The grout lines were thin and the task seemed daunting. After researching various techniques, I found the Fein Multimaster and purchased one along with six diamond blades as recommended by the Fein customer support folks, who incidentally are as good as they could be. This is a heavy duty tool and the oscillation approach is very, very effective. It took a bit of time to develop a technique, but once we understood the tool, the job was completed effectively and efficiently. My only complaint is that the dust collection system did not work well and we improvised with a shop vac.

We also used a wood cutting blade and a carbide surfacing blade and were quite pleased with the ease of cutting and the results generally. This is a specialty tool, however, and the infomercials and the dvd that accompany the tool make the described tasks look a lot easier than they are in real life.

However, we saved thousands of dollars in labor over alternative methods, did not damage any of the tile, and the result was better than expectated.

I do not see this as a handyperson tool that will gather dust on a shelf somewhere. It is a specialty tool that can accomplish many tasks very efficiently. It does many tasks that were formerly the province of a sawzall, but if you are cutting nail embedded material or doing demolition, it is the wrong tool. It is a finish tool when working in wood and will greatly facilitate repairs in tile surfaces, especially where you are facing grout problems or have to replace broken tiles. It is essential that the operator wear a first class dust mask and eye protection, although that goes without saying.

Finally, the various blades are expensive, in fact too expensive. They are available on Amazon at discounts, but still, a damaged blade is a $50 problem, and that limits our experimentation with the tool.

Overall, the tool is what it is promoted to be. It is very well made. The case is well designed and can hold all of the blades and attachments that one might like. I recommend it more to professionals than homeowners as it does require good mechanical skills to operate effectively.

MichaelGet more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Decide Now

The amount of projects that can be handled effortlessly is unlimited. As soon as you have this tool in your hand one word comes to mind right away. QUALITY. Excellent design features includes the ease of use when I change tool ends and I especially like the extra long power cord. The case isn't too bad either. For a tool this pricey you definetly get what you pay for. You can buy with confidence. The included DVD is also a great help, as it details alot of uses for the tool.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Get it now!

Fein MultiMaster FMM 250Q Top
I have seriously wanted to have a Fein Multimaster for years, and I finally had a project that justified purchasing it. From my research, there is no competitive pricing for this product, but the quickest and free shipping was available through Amazon, and of course that gives the buyer Amazon's excellent customer service if there should be a problem. This is German engineering at its best with easy accessory change mechanism. It also has Mercedes and BMW pricing. That said, I am glad to have purchased something that I know will last a life time and never require replacement. Accessories are equally expensive so I will need to build the kit a little at a time. Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Buy Now

I was a bit reluctant ordering my MultMaster mainly due to the price, but now that I have it, it was worth every penny. It performs as well as the infomercial, but it does take a little practice holding it steady especially when making plunge cuts. There is some more than usual burning of wood when cutting, this takes some getting used to as smoke will definitely be present. It will kick back slightly, but this is overcome by entering at a slight angle. The attachments connect quick, the case is fine for me, and the overall feel is great. This is one of those tools that you will love and use for years, and the somewhat high price will pay for itself in no time.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Order Now

This is a great tool for all those little jobs that are frustrating and time-consuming because you have to do them without a power tool. My husband and I were in the middle of renovating a half-bath when we decided to order it. We must have used it for 8 different things before the job was done and by having this tool we saved hours of time and frustration. It seems expensive but when you consider the time it saves on the job it's well worth the money if you plan to be doing some renovating.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Immediately

I started a handyman business about a year ago and this tool is the is by far the most used tool in my total collection of tools. The only drawback is the cost of the tool itself and for accessories. I highly recommend this tool for any handyman of contractor.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Best Quality

Well built tool. The good. Works great for removing old paint in tight spots. Used the blade attachment to remove caulk right next to brick in minutes. It would have taken hours.
The not so good. The pin that holds the attachments in wouldn't go in easily after being closed without the pin in it and the lever that holds it in will smack you good if you get in it's way.
The tool and all attachments are very pricey but I couldn't find a comparable alternative.
Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top This instant

The Multimaster works by moving the blade (or the sanding foot) in a random orbital motion. So unlike a rotary tool, the blade doesn't pull you through the material. That means you can control the depth and speed of the cut very precisely. The tool feels solid but not heavy and it doesn't vibrate in your hand. All the energy goes into the cutting device you've attached to it, and you don't gat tired holding on to it.

It's a very useful tool if you're doing removations. I bought it for sanding profiles like wood molding, and it is quite useful as a profile sander. But it does much, much more. Example: we wanted to move the old vinyl floor in a kitchen and install tile. The vinyl was glued to luan plywood, and both layers ran under the counters and the dishwasher. With one of the Multimaster's saw blades, it was relatively simple to make a clean, straight verical cut in line with the face of the cabinets, back under the toekick. That let me pull up the vinyl and luan from the open floor area and leave it in place under the cabinets. I don't know how I would have been able to do that with any other tool except perhaps a Bosch RotoZip.

It's expensive and the new (250 TOP) version comes in a cheesy plastic case, although to be fair, the metal case that the old (Model 625) version came in was stamped from very thin sheet metal. (If you buy something other than "Top" complete kit, the tool comes in a cardboard box.) But the case is the only light-duty item in the package.

Even if the packaging is cheap, the tool and the accessories are definitely well made and the attachments that are available make it very versatile. If you're taking apart a room in your house or someone else's house, this is a great tool to have.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Top Quality

This tool reminds me a little of the Rotozip. It works extremely well for the job it was designed for, Multimaster=Flush-cutting, Rotozip=cutting drywall, but isn't as good for the other purposes they are advertised for.

I have used this for a few weeks now and have used the flush-cutting and sanding attachments quite a bit already. It has come in extremely handy for those jobs that it is about the only tool that would work, and average at the other jobs like sanding and scraping.

I would give the tool 4 or 5 stars but the blades are way overpriced and don't last real long. You can buy generic blades that are much cheaper and in some cases better quality, but Fein is trying to stop people from making these blades.

By the end of the year Bosch will have their own version here in the states for much cheaper so wait if you can.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Review

This is an expensive tool with expensive accessories, but in my opinion well worth it. I am an auto mechanic by trade and a homeowner that loves and appreciates quality time saving tools. Since my purchase 2 months ago I have used this tool to pattern cut and install a bath surround, cut and install plastic molding(using a simple adjustable square),trimmed out paneling while on the wall, removed a glued vinyl bathroom floor (with ease), plunge cut and removed damaged soffit material( with such precision that the removed wood could be used as a pattern for the new replacement wood)and scrape old paint off my house corners and soffits. I am very impressed with the tool quality and ease of changing attachments. The profile sanding attachment works good. The storage box could be of better quality but it serves it's purpose. If I were to purchase this again I would probably buy a bare bones kit and choose my accessories seperately. I have some attachments I will probably never use and would gladly trade for more wood and metal cutting blades. Hope this helps you out! Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top

In just a few words... How did I ever live without a Multimaster? I am a remodeling contractor by trade, I have found so many times where the Multimaster is THE tool to get the job done. The surgical precision is much less damaging in lath and plaster than a recip. saw. This tool is worth every penny.Get more detail about Fein MultiMaster FMM 250Q Top.

Order Fein MultiMaster FMM 250Q Top

I LOVE this tool. I just upgraded from the previous model (MSXE 636-2 variable speed). I won't go into why this tool is so great because everyone else has already done that. Instead I'm going to compare this tool to its predecessor.

PROS:
This is now a perfect tool. Fein has elegantly fixed the minor gripes I had with the previous generation of the tool. My gripes were 1. Blades slipping and 2. Slow blade-changes using the awkward hex-key that always felt like it was about to cam-out and ruin the lock nut. Both issues have been neatly resolved by the new design. The new star shank on the blades completely eliminates any possibility of slippage, and changing blade, or repositioning it to get into a tight spot no longer requires a trip back to the tool box to get the hex wrench. I LOVE this feature. FEIN ALSO ADDED threaded holes on the body of the tool which function as hard-mount points. This allows you to attach small accessories such as a fence, a depth gauge, a rail guide etc. You can also use the hard-mount points to bench-mount the tool (so you can bring small or delectate work to the tool). This opens up a lot of flexibility on an already very flexible tool. I also like the more ergonomic shape and rubber grip on the new design.

CONS:
None to speak of. The new machine is a tiny bit louder than the old one, perhaps due to the more powerful motor, although it's louder even on the lowest speed setting. To be honest I'm just trying to find SOMETHING to say on the con side. It's really a perfect tool.

OTHER COMPARISONS:
At first I thought I had a slight preference for the larger speed control dial on the old tool, but again he NEW design is ultimately better because the smaller dial (on the tapered rear-end) allows for a more compact dust collection system and a slimmer profile overall. I do actually prefer some of the aspects of my old unit's metal case & divider system. The new case can actually hold more stuff but it doesn't organize the contents as well as the old case did. You can still buy the OLD case, but I'm sure I can easily make the new case as functional as the old case by adding some little dividers etc. The new blow molded tray is more durable, and there's more space allocated for the cord (which is welcome). If FEIN had put a divider system in the new case, it would have been a perfect redesign in my opinion. Perhaps Fein is trying to keep these GERMAN MADE tools made in Germany by cutting costs (instead of going to CHINA like many others have done). If the cheaper, simpler, divider-less case is part of that profitability strategy, I forgive them. I'm handy and so are you (that's why you're reading this review), so I'm going to quit complaining, and get busy customizing the case with dividers to suit my personal needs.

BLADE COST:
As you may know, the blades for this device are somewhat expensive but Fein is now group-packing blades for meaningfully lower cost than before. Basically 3 packs for the price of 2, and 10 packs for the price of 6. This helps. So now I can keep ONE blade of SEVERAL types and yet affordably buy SEVERAL blades of the ONE type I 'consume' regularly. I've recently also seen aftermarket blades on eBay which are cheaper than the FEIN blades, but I've never actually tried them. For all of the trash-talk, I'm always impressed with the longevity of the wood/metal E cut blades.

A FAVORITE TOOL:
This is definitely one of my favorite tools, and I HIGHLY recommend it. Everyone who watches me use mine buys one for themselves. I could write several pages describing all of the things I use it for.

If you own an older model, an upgrade is worthwhile if you use the tool with ANY regularity. The upgrade cost me a mere $100 because I sold my old one (with blades & accessories) on eBay.

If you upgrade not only will you be doing yourself a favor, but you will be making your previous model available to someone else who can't quite afford a new one, or who hasn't yet made the plunge.



Get more detail about Fein MultiMaster FMM 250Q Top.

Where To Buy Fein MultiMaster FMM 250Q Top

I have to admit that I was somewhat skeptical about bying the Multimaster because this tool was so expensive but now I can't imagine being without it. It makes detail work in hard to reach places a snap. It will pay for itself in the first couple of uses in the time and frustration it saves!Get more detail about Fein MultiMaster FMM 250Q Top.

Shop For Fein MultiMaster FMM 250Q Top

The Fein MultiMaster is an extremely well built piece of machinery, it is sturdy, simple and easy to use. I install a lot of laminate and hard wood flooring and this tool cuts down the install time dramatically especially for rooms with odd angles. The tools sanding abilities are excellent with a great variety of different attachments for the trickiest of sanding jobs. One small complaint was the vacuum attachment which I could not get to work with either of the two vacuums I own, I need to work on making a special adapter to allow it to fit. Overall I am extremely glad I bought this tool.Get more detail about Fein MultiMaster FMM 250Q Top.

Cheap Fein MultiMaster FMM 250Q Top

I had 15 Pella wooden window frames, circa 1969, in need of repainting. Three years ago they were 'professionally' repainted. This consisted of slapping new paint over the cracked old paint and sending me a $2000.00 bill. The concept of sanding and prepping the frames was apparently overlooked by the 'professionals'.

Last year, in preparation for a graduation party, my bride strongly suggested that we needed to improve the appearance of the windows. Replacement windows were not in the budget, and I didn't want another 'professional' job visited on my wallet. The wood was still in good shape but the paint needed to be taken down in many areas of the frames. Lots and lots of sanding needed to be done.

After prepping one window frame by hand I knew I needed a better and faster approach. I saw the Fein on Amazon.com and went for it.

I have been very happy with my purchase. It has made a large nasty job much quicker. The detailed sanding accessories made short work of all the mutton bars on the windows.

A trick that helps prolong the sanding paper life is use of a sander cleaner stick, like the kind you use to unload the sand paper on a belt sander. It looks like a large art gum eraser stuck to a paint stirrer.

Heat from too much pressure will ruin the hook and loop corners of the sanding pad. I had to buy replacements.

It is a beautiful tool, but like other fine German products, the replacement parts are not cheap. Someone has to help pay for all those short work weeks, extended vacations, and retirement benefits the europeans dearly love. Think of it as the BMW in your tool box.

Get more detail about Fein MultiMaster FMM 250Q Top.

Buying Fein MultiMaster FMM 250Q Top

First off, I'm not a professional handyman but am pretty good with tools and making/fixing things around the house.
I got the tool while I was installing a wood floor in a bedroom... it was extremely useful to under-cut the door trim and I had a wood planked wall that needed undercutting as well... the door trim could have been cut by hand with a flush cut hand saw but the wall under-cut would have been a nightmare without a tool like the multimaster... made quick work of it... even cut right through some hidden nails with very little effort (using the "E-blade").

tool feels "heavy duty" and built to last, the front black part is all metal... orange part is a good quality feeling plastic... power cord is extra long and is a good quality rubber. blade changing is easy as pie with the flip-up lever system.

the case it comes in is OK... it's plastic and like others have said, it doesn't open 180 degrees... only 90 degrees, so maybe it could come down on your hands while rummaging around in the storage boxes for the blades... not a huge deal but would have been nicer if it opened a full 180 degrees...
also note that the blades can get hot so trying to change them immediately after use risks some fingertip burns - but I guess that would be true of pretty much all saws and their blades...

overall, I feel it's a good, solid tool even though a bit pricey... like others have said here, I'd be likely to use it a lot more if the replacement blades weren't so expensive - but they also seem to be of very good quality metal and I suspect each will last a good amount of time before needing replacement...

We'll see as I still have a lot of projects to complete in my 100+ year old house! ;o)
Get more detail about Fein MultiMaster FMM 250Q Top.

Buy Fein MultiMaster FMM 250Q Top

This is one of thoes tool you didn't know you need till you have it. I use it all the time and will do thing that no other tools will.Get more detail about Fein MultiMaster FMM 250Q Top.

Purchase Fein MultiMaster FMM 250Q Top

After working for hours, trying to remove old carpet from our RV, I knew there had to be a better way. When I saw the advertisement for the Fein on television, I just had to give it a try. My husband thought I was nuts for spending that much on a tool, but when he used it to cut sheet rock for our new den, he changed his mind. We also used it when we remodeled a bathroom. It worked well for smoothing out the rough surface under the tile we had removed. The attachments are a little expensive, but worth it if you have a back breaking job to do. I'm so glad I took a chance, and purchased the MultiMaster. Get more detail about Fein MultiMaster FMM 250Q Top.

Cheapest Fein MultiMaster FMM 250Q Top

Was a little taken back buy the price, and the cost of the accessories. But nothing can match what you can do with this tool. I'm remoduling a older home, and have used this to remove old moulding. You can cut the nails with out damageing the wall or wood. The sanding attachment works great in hard to reach areas. Get more detail about Fein MultiMaster FMM 250Q Top.