Save Fein MultiMaster FMM 250Q Top

If you want to spend the $400 for this tool, go ahead and buy it. It will do everything as advertised. But, if you want to spend $350 less and have something that will do all the same type of cutting, get the MultiTool by Chicago Tools. I got mine at Harbor Freight Tools and it is great! Chicago has nearly all the same blades for sawing, scraping, grout cutting, diamond blades, etc. The only real difference is how you change blades. The Chicago uses an allen wrench. Big deal! Save your money! Get the Chicago Multi Tool.

Get more detail about Fein MultiMaster FMM 250Q Top.

Low Price Fein MultiMaster FMM 250Q Top

I agree with Mantra, this is a great tool for small things that would otherwise be time consuming, difficult, or not possible at all. It's not meant to be the tool you use for everything. It is pretty expensive for the average do-it-yourselfer, but if you're remodeling your home or work in construction/remodeling it does save time and time is money. I bought this for a friend who does remodeling and it does a great job for some things. The blades are VERY expensive and don't last as long as they should for the big price. That's disappointing given the high cost of the tool itself. Eventually it'll pay for itself, but I'm wondering if there wasn't a better tool choice out there...
If money is no object it's a neat little tool, but for the average homeowner, it's not worth the money.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Right now

I purchased the multimaster top after I had watched the DVD a few times. After contracting a window replacement job, I thought this tool would be a good choice for cutting out the old aluminum frames. I purchased the top, since I knew I'd be in enough trouble, you might as well buy the top of the line if you're gonna "pay" for it "later."

Anyhow, the new windows arrived and I began to use this tool to cut around the aluminum frame so that the other windows would slide snugly into the opening.

Was I in for a surprise. I worried it wouldn't work well, but this tool literally cut these windows out like a can opener. Fast. I wish I had taken a video so you could see. This tool saved me much time on this particular job, and made the job VERY easy to accomplish. All windows were removed with ease. The job took only one days labor, with only one person (myself) doing it.

I have used this tool on many applications since. I never thought this tool would be so handy. I set 14 doors and jamb openings, and had many shims to cut. Forget the utility knife method. I got the multimaster out and cut though the multi-layers of cedar shims in seconds. And the cuts were flush and true so there were no parts of the shims sticking out to make casing the jambs a problem at all.

I have also used this to cut inside corner moldings on remodels at the height of the new baseboard. I just marked the inside corner molding and cut through with the multi. Piece of cake. The other methods would have been to remove the trim, cut it off and renail, or take a chisel and/or utility knife to it, which is time consuming.

I have used this tool in many other applications and too much detail to explain on here. But if you buy this tool, you will find yourself using it more often than you had thought you would.

Cons:

This tool does get quite warm. Wear gloves.

It is probably louder than what you would guess.

The blades are expensive. (But as a contractor I include the blade cost in my job bid) which isn't a ton of money, but it is a product that will be used to accomplish a job, so my customers pay for that in a way.

The price is not a con. It is well worth it. I actually got the TOP for 360.00 at a tool shop where I live. This was their last one, and not the first time I enquired with them about it. EVERYONE in that shop has one and they all rave about it. Several customers came in while I was purchasing it asking what I did for a living and telling me how I would love this tool. They were correct.

If you remodel/build buy this tool. You will be glad you did.


Get more detail about Fein MultiMaster FMM 250Q Top.

Lowest Price Fein MultiMaster FMM 250Q Top

Got this for my husband for father's Day, and he is thrilled. He installed new hardwood floors, a built-in closet and new sliding doors and said without the Fein it would have been impossible (for him).Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Decide Now

I saw this tool advertised for years and never gave a second thought to purchase one. It appeared to me to be a tool used for one or two different jobs and not good at doing any very well.
In the past I used a router to trim some window extensions (not good results), and a utility knife to cut carpet. I would remove a door to trim the bottom and I would use a sawsall to cut flooring up to the wall and a roto-duster to cut outlet holes and remove grout by hand. But now I use the Fein MultiMaster for all of this and more. It does everything the promotions claim. That's a first for me! I don't understand some of the disappointments aimed at this tool. I came to believe that $15 for an E-cut blade is a reasonable price.
If a person has never had to remove grout by hand the price of the cutter may seem high but at least for me, it's a very reasonable price and could be considered low. I don't find the blades dull quickly at all. I've not used the sanding pad so I can't comment.
After I purchased the Fein MultiMaster Top Kit I happened upon an infomercial on tv. It's a good thing I bought it before seeing that because that infomercial comes across to me a bit cheesy. Somewhat related to the Ronco slicer-dicer. But it really isn't, it's a solid tool that should last a life time.
If you do any remodeling or some of the projects that I've mentioned you won't be sorry for this purchase and will wonder how you've gotten along without it.



Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Buy Now

This is a great tool - as long as it is used as intended and not over extend the capabilitis of the tool.
I own a construction company. My crews have access an inventory of hundreds of tools - initial cost of the tools generally is not a consideration due to high labor cost. Also cheaper tool have a way of breaking down before the entire job is completed. However, I do insist my crews to come up with the most cost effective way to perform the task at hand. Example - We could clean the floor very well with only a tooth brush but we can do a much more cost effective job (faster) when we use both a floor mop for the large areas and a tooth brush for the tight areas.
Most complaints of this tool appears to involve usage of this tool in exclusion of all others. over usage of a new toy. This tool is a fantastic pinch hitter excel for those LITTLE impossible cuts but not a volume work producer. Great as a suppliment tool on large jobs.
As to sanding window moldings prior to painting, small areas are ok, larger areas will just kill the sand paper and pads (cleaning floor with the tooth brush again). Should consider a random orbital sander and/or small belt sander. Won't believe how effective a belt sander can work when a little fore thought is put into a project. Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Order Now

Price is too high for this product. Advertisments show the tool and components higly mignified. This tool is worth 50 to 75$. Those who get carried away by advertisment, implulse and weeekness for tools please be away from this tool. If you want it wait till prices come down, in current economy this tool is a total waste of money and a wrong priority.
The price for accessaris is absolutly not justifiable. Stay away from this tool.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top

We own a custom roofing company that specializes in lifetime metal roofing. We have to trim back siding materials so our flashings can slide up under them. Sounds easy, but is incredibly hard to actually do if you want it to look good.
We have tried over a dozen different tool scenarios with mixed results, but nothing worked perfectly.
This tool does. When removing heavy wood siding the metal cutting blade can slip in under the siding and easily cuts nails off cleanly. It is very easy to hand hold and cut straight lines or use a piece of wood as a cutting guide.
The quick change tool system blades NEVER get loose, never. The Fein blades are well made and last. The tool is built well and has lasted well in a very harsh environment. Roofing tools in general do not last long at all, this tool has.
The case is well made with plenty of room for accessories. Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Review

Fein MultiMaster FMM 250Q Top Great service and a wonderful product. Wish I'd bought it along time ago.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Top Quality

The sanding pad that hold the sand paper came off the first time I used it.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top This instant

This tool can do it all, it's kinda tricky to get the accessories hooked up just right.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Immediately

Have only used this is a few applications so far but it has performed as the advertisement has shown.
Great product and will come in handy for many projects.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Best Quality

I have the predecessor to the "multimaster" before it was called "MultiMaster". It's superb, saves lotsa hours, does precise triming and cutting. Great tool, when removing jamb mouldings it cuts right through nails never mars teh wood, cutout wood for larger electrical boxes etc, much more control than a Roto-Zip, and Rotoa-Zip can't reach like the metal/wood blade does and makes less mess when cuting drywall. How do you get work done without one, it's as handy as a Milwaukee Sawzall, but for smaller, more precise cuts. A+, the GERMANS do it again. FEIN is FINE.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Get it now!

Why pay $400.00 for this Multi-tool when you can get a Dremel MultiMax for less than $100.00? The Dremel accessories are alot cheaper to buy than the Fein accessories. The Dremel MultiMax is alot lighter & is not as tiring to use! The Dremel MultiMax cuts well enough for me & I have even cut some nails & screws into with the metal blade. I tried the Fein MultiMaster & after a few minutes my forearms were tired & aching. Just think what an hour of operating it would do weighing in at 3 lbs? It's your money & your choice!
I believe the info-mercial on the TV is what is keeping this tool selling so much! After you buy it you are stuck buying the expensive accessories just to use it.Get more detail about Fein MultiMaster FMM 250Q Top.

Where To Buy Fein MultiMaster FMM 250Q Top

Solid, well-made, and does exactly what it is supposed to do. No compromises in the machine itself, but you pay for it. The case interior is not so great for a tool of this price --- and in particular one that is likely to spend time on job sites and in the back of trucks. Exterior is fine, but flimsy plastic compartments inside. Not a big deal --- I had to think a while to come up with a criticism other than price.Get more detail about Fein MultiMaster FMM 250Q Top.

Shop For Fein MultiMaster FMM 250Q Top

I was attracted to the MultiMaster because of the infomercial, but the cost was far greater than the utility it would provide for me.
Recently I saw a Harbor Freight flyer with their "Multi-Function Power Tool" (#65700) reduced from $59.99 to $39.99. I neded to remove grout from my walk-in shower so I bought it. It functions the same as the MultiMaster and did a wonderful job. It doesn't come with as many attachments and there is no case, but couldn't be more pleased.Get more detail about Fein MultiMaster FMM 250Q Top.

Order Fein MultiMaster FMM 250Q Top

I have only used 2 of the attachments for the tool. I like the precision that the tool allows. The oscillation speed is fast and the tool is heavy enough that control is easy. This review is of limited value to prospective buyers, but at this point I can say that I have confidence that the other attachments that are included will work well. The tool is well built and the attachments switch out easily. I am happy so far.Get more detail about Fein MultiMaster FMM 250Q Top.

Buy Fein MultiMaster FMM 250Q Top

The Fein Multimaster tool is fantastic. I used this tool to 'hand sand' hard to reach areas of a large hardwood floor refinishing project. I also used a couple of the blade attachments for replacing slats, cutting molding, etc. I could run the tool for hours and it would not get hot. Unfortunately, the two "hook and loop' sanding pad attachments that came with my set did not last very long. These pad attachments AND especially the velcro sandpaper packs are ridiculously expensive. I have even purchased other sandpaper brands and trimmed them to fit the Multimaster. Fein should be proud of their tool, but embarrassed by their accessory prices.Get more detail about Fein MultiMaster FMM 250Q Top.

Purchase Fein MultiMaster FMM 250Q Top

The tool comes with no real Owner's Manual, and the FEIN web site was not a lot of help. I found a manual on a supplier web site, but still this tool could have a better manual. The tool itself is realy nice. I will be using it more as I put in wood floor.Get more detail about Fein MultiMaster FMM 250Q Top.

Cheap Fein MultiMaster FMM 250Q Top

Fein MultiMaster FMM 250Q Top
That's the name of the boat I am restoring with the help of the multimaster. As some of you will know, in a boat there is a lot of custom fitting wood, metal, plastic and fiberglass. Well, I finally got old and figured I had better find an easier way. So I dipped into my meager savings and purchased one. I am very happy to say that the tool makes it a total delight to fit in things. It's turning out to be one of the most custom boats I have ever done. Everything is within a blade width. Really didn't like laying out that much money but Amazon had the best price. The case looks great but sucks on the inside.Overall I would give it a five Plus.Get more detail about Fein MultiMaster FMM 250Q Top.

Buying Fein MultiMaster FMM 250Q Top

I bought this for my husband to help with a bathroom remodel project. He cannot stop talking about what a great produce this is. He has shown it to several of our neighbors and told several friends about it too. Makes some nasty work very easy!Get more detail about Fein MultiMaster FMM 250Q Top.

Discount Fein MultiMaster FMM 250Q Top

For what possible purpose in my industry of thirty years could the same tool my doctor sawed off my plaster cast back in 1962 be satisfactorily used for? Needless to say I resisted owning a Fein tool for many years. Over the last several years, through job site exposure to the unique characteristics of the Fein tool, I slowly became a believer. So much so that after decades of purchasing tools with cost as a critical factor in every acquisition, I sprinted to my favorite tool seller as soon as I discovered that the first quick-clamp model hit the shelves, with cost relegated to a status of non-factor. This spelled the end to lost allen wrenches and stripped allen head screws. Now all was right in the world, as I finally made the transition from skeptic to believer.Get more detail about Fein MultiMaster FMM 250Q Top.

Cheapest Fein MultiMaster FMM 250Q Top

I am using it on existing walls to cut into studs, nails and drywall. I can do things with it without tearing down the old wall and building new. I have read reviews of too much vibrating and heat but I don't think those people work much with power tools as it is no more than I would expect from such a tool. I do think the blades are over-priced and have tried some of the after market brands. Those brands do not compare to the Fein blades as I seem to wear them out quicker and noticed that they did not cut as well. Get more detail about Fein MultiMaster FMM 250Q Top.

Low Price Fein MultiMaster FMM 250Q Top

The multimaster is a very useful tool, I bought it for the purpose of installing floating wood floors and have since used it for many other purposes. It's not a replacement for any of the tools I use, but a supplement to them. The only drawback is that the blades are expensive, but its a cost that is covered by the time saved. I wore out two blades on the last flooring job, and saved at least two hours of labor. Get more detail about Fein MultiMaster FMM 250Q Top.

Save Fein MultiMaster FMM 250Q Top

I have been repairing my hurricane damaged house, nothing is square anymore due to mother natures wrath. Every cut is a specialty cut no matter what project that I may be working on. The multimaster has proven to be my miracle tool over and over. I can now just install most any material at the work site making precise fine adjustments for a perfect fit in my unperfect home.
Don't wait!!! Your projects need this tool now!!! Get the FMM 250Q Top, it comes with enough attachments to do most any project. You'll also be able to determine what additional attchments you might desire for that really specialty cut that only the multimaster can do.
Dave
Pensacola Beach, FloridaGet more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Right now

We're in the process of restoring a recently purchased home. We bought the MultiMaster to more efficiently manage those smaller tasks with molding, hardwood floors, etc. Very impressed with the utility and pleased over all. If I ever found generic attachments I think it would be the perfect answer. MultiMaster parts are very overpriced. Still, I give it five stars.
NHGet more detail about Fein MultiMaster FMM 250Q Top.

Lowest Price Fein MultiMaster FMM 250Q Top

This thing is great. A little on the pricey side, but sort of a jack of all tools. If you are a professional it is a must have tool. I would also recommend for the avid "weekender". I think I love this more than my wife and she is my world! Just don't tell her :)Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Decide Now

I am doing some remodeling and have found numerous ways to use this well built tool such as cutting sheet rock wall nails between the sheet rock and studs. sanding in tight places and cutting tile are among just a very small amount of tasks that would have taken a lot more time with other tools!I would place the MultiMaster on my 10 most used tool list! Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Buy Now

I have pondered getting one of these tools for about 2 years. The high price of admission always stopped me. I finally caved in when I decided to refinish some kitchen cabinets and wet bar cabinets. The orange store wanted $26k to resurface just the kitchen cabinets. I decided $400 for a Fein Multimaster would easily pay for itself on this job, if I put in the elbow grease.

I considered an inexpensive knock-off from a tool store that specializes in low cost Chinese manufactured tools. They now carry a copy of the original Fein Multimaster. It didn't come with profile sanding attachments, and I didn't know if the original Fein profile kit would fit this unit. What swayed me to the real McCoy was the profile sanding kit. My raised panel doors have rail and stile profiles that are quarter round; they are a real pain to sand by hand. The raised panel is a cove profile. The Fein profile sander kit included profiles for both of these shapes. The sanding profile kit is excellent, far better than the Porter Cable profile sander (which I tried and returned to the store due to poor performance). The Fein profile sanding kit firmly locks the sandpaper in place using firm spring pressure. The PC unit used pressure sensitive adhesive backed sandpaper, which fell off the profile as soon as it could detect the slightest hint of sawdust. I am a bit concerned though, about where to find the replacement sandpaper for the Fein profile sanding kit.

The Multimaster makes short work of sanding all those detail edges. I estimate I can sand 5X more door profiles using this tool than sanding them by hand in a given amount of time. The profiles stay firmly in place during sanding. The Fein sandpaper has impressed me as being very high quality. It lasts a long time compared to the sandpaper I have purchased from competing manufacturers. I sanded 5 doors and 3 drawers using 3 pieces of profile sand paper.

The dust extraction accessory works well, too. It doesn't exactly fit my shop vacuum, but it works fine. The hose seemed to stay attached fairly well. There was very little dust produced during long sanding periods.

The tool's vibration is not uncomfortable over long sanding periods, and noise is not too bad, either. Do wear ear protection, though. The tool's construction quality is very good. It reeks of good design and good manufacturing materials and processes. The cheap knock off version doesn't come close to the fit, finish, and heft of this tool.

I look forward to using the grout removal tool in the near future. I have used a Grout Grabber, in the past. I really like the Grout Grabber. I think the Fein will leave it in the dust, if it removes grout as well as it sands.

I would have given it 5 stars if the price had been in the $200 range. $400 is a lot of coin to shell out for a hand tool with a few accessories.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Order Now

Find the product to be at best questionable. The unit itself gets very hot with a steady use. The attachments wear out super fast and the replacements will add up to more than the tool itself if you plan to use it for any length of time. The surrounding material heats up to the point that it smokes and in the case of wood actually burns.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Get it now!

Original order arrived with missing attachments, tool showed signs of clearly being used. Order was returned to Amazon for replacement. Second order arrived with all attachments, however actual tool appeared in worse condition then first (dirty, scratches and scuff marks on body, nicked cord), refurbished??? Order was returned for refund. Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Best Quality

I've been a finish carpenter for over 15 years and have held back from buying this tool for the last five. I finally broke down and bought me one last week. Superfast shipping 5 stars arrived to Kauai, Hawaii in 2 days. Was stoked when i opened the box. Everything looked fine until i noticed that the most desired blade i would use daily in the package had already been used. I burst into laughter. thinking that mf (some guy in the wharehouse) had seen the comm on tv and could,nt resist to try it out on his lunch break. Then i released the quik chuck and noticed sawdust. Wow $400 big ones spent for a used tool. I laughed again. other than that it does what it supposed to do nothing less nothing more. the best tool of its kind. if your gonna get your money out of it or have the money to burn. the competitors cant beat it.

Amazon you should send me a 3 pack of the metal/wood blades to ease my incurable giggles!!!!

cant wait to go to work tommorow to play somemore.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Immediately

54 bucks for a replacement circular saw blade! I had placed it incorrectly when I snapped the safety closure shut and the blade shattered. Also, the nail cutter lasted about 50-100 nails before it was useless. Other than that, the versatility and power are outstanding. It's a fun tool to use.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top This instant

I had been holding off buying this tool for several years. Recently one of my customers in whose house I had installed a fiberglass tub surround had a crack appear in the soap dish of the unit. The company sent someone out to fix the crack as the surround was still within the twenty year guarantee period. The repair failed within a year and the company at its option decided to replace the complete surround. When I install these surrounds I use twice the amount of adhesive that is supplied by the manufacturer of the surround. I dreaded taking this surround off as I could picture most of the walls comindown with the fiberglass. Time to purchase the fein. This tool, using the scraper blade cut through the adhesive like a knife through butter and the fiberglass surround was removed completly with no damage to the underlying wall. the new surround was installed the same day and I saved at least a day of scraping the adhesive off with a torch and putty knife. Great tool.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Top Quality

The MultiMaster is exactly as advertised and described. It has saved me tons of time and clean up. Highly recommend it to anyone who does a lot of renovation work.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Review

The infomercial and Fein website videos (http://www.fein.de/fein-multimaster/us/en/media/multimaster_video.php) accurately demonstrate the capabilities of this tool. It's no hype. This is the tool you'll reach for when you can't think of any other to do the job. The tool is constructed to stand up to the day to day use of a professional, but no serious DIYer should be without one. Buy the kit, if you can afford it. I priced all the kit parts seperately on many different websites and the kit is cheaper. Still, be prepared to spend about twice as much as you'd expect for replacement blades. Amazon.com has the best prices on the different kits, but I found some eBay sellers that have better deals on the accessories.Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top

I saw an installer using one of these and was impressed, so I bought one.
I find it very convenient for some jobs. I used it to cut 6x10" holes in wallboard for mounting speakers in a room's walls, and then discovered some framing wood that was too close to the holes. By mounting an E-cut blade at 90 degrees one side or the other, I was able to cut half way through a 2x4, one inch outside the hole area, to make the needed clearance. Without this tool I'd have had to saw right through the wallboard, weakening it a lot, then patching the cut. Even with this tool, being inexperienced, I did cut into the back of the wallboard in a couple spots, but it was easily patched and not weakened too much.
In another place I cut about 3/8 by 3/8 by 2" out of 2x4 right behind the wallboard. This could have been done with a chisel, but it would have been more time consuming.
One does have to be careful not to burn the work--you can put a lot of power into a small place and easily scorch wood and make a lot of smoke, and presumably fire too...
The tool is very comfortable to use, because it is not fighting to go somewhere, like rotating cutters do.
My only complaint is that the blades cost 2-3x more than I think they should. There are some much less expensive similar tools just coming out now, and perhaps the competition will lower prices, but of course the other tools aren't going to use compatible blades I'm sure. And likely they won't be as sturdy as this/these.
One job that failed: a number of sheetrock screws protruded maybe 1/16" into a closet, just waiting to snag someone. I tried to cut the tips off using the wood/metal E-cut blade, but it damaged the blade (though I was still able to use it for the above mentioned cuts). The carbide tile file was too coarse for the job. I finally used a Dremel with a cutoff wheel instead. Maybe the diamond blade would have worked.
All in all, it seems like a good addition to a remodeler's toolkit.Get more detail about Fein MultiMaster FMM 250Q Top.

Shop For Fein MultiMaster FMM 250Q Top

This is the only power tool, so far as i am aware but possibly the Rockwell knockoff would also work, that will quickly and cleanly remove old hardened window glazing without breaking the glass. For this one purpose alone, it is worth the money if you have many windows to re-glaze. All of the movement is in the X-Y plane, none in the Z axis so you can rest the tools directly on glass without breaking it. It is also extremely useful for flush cuts on wood and sheet rock cutouts, where it does a neater job than a rotozip. Blades are a bit too expensive, but high quality. Great tool for flush cutting nails. Cuts faster than one would think. One of the most useful tools I own. Get more detail about Fein MultiMaster FMM 250Q Top.

Order Fein MultiMaster FMM 250Q Top

I think the other reviews of this device are pretty much on target. This is an excellent tool and it does what it advertises. But does a tool that basically vibrates fast really need to cost four hundred dollars? Here are my thoughts:

1.) The patent on this tool has expired and there are several multimaster "clones" out there. A short list: Rockwell, Dremel, Harbor Freight Tools, Bosch. Of these, the Bosch is probably the best, and it even takes the Fein blades. However as of this writing you can only buy the uncorded version in the United States. This is not the sort of tool that should be powered by a battery.

2.) All of the attachments work very well. The sanding function is terrific and if you haven't used an oscillator of this type before (for instance if you're used to using a Black & Decker "Mouse" or something similar) you will be pleasantly surprised at this upgrade. The other attachments also work well, but I would not use the E-Blade or any E-Blade to cut metal, unless it is very thin. Don't try to cut hard metals.

3.) I agree that the plastic case inserts are not professional grade. The case itself is acceptable, but I prefer the Bosch cases.

4.) The blades. Buying replacement blades for this tool can be a drag. The Fein blades are of course very good, but at a starting price of $15 and up you're talking about a further outlay of hard earned money. Yes, there are other options, including the Harbor Freight Tools option or making your own blades, but remember these options void your warranty and aren't as good as the Fein blades. BTW, yes you can use round blades with this tool; you don't "need" the star-shaped quick attachment feature that is under the screw, although it obviously helps.

The verdict: if you are a casual user and only plan to do the work this tool requires a few (less than four) times a year, I wouldn't spend the money. Buy a clone tool instead. Of the clones mentioned earlier, I would avoid the Rockwell--the blades don't work with any of the others. Bear in mind that this tool shines best when used for the things shown in the informercial; while you can probably ditch your reciprocating saw after you buy the multimaster, I would still keep around my jigsaw and a few other tools.

In addition, if you are the type of person who has to have the best of the best then I would say that this tool is for you. Sure you can de-grout a bathroom with a dremel or similar tool for about 1/4 the price, but this is surely not the point for somebody like that.

If you are a professional user, in my view this is a no-brainer. Spend the money on as many multimasters as you can afford. They will pay for themselves many times over within a few months.Get more detail about Fein MultiMaster FMM 250Q Top.

Where To Buy Fein MultiMaster FMM 250Q Top

Great product! My husband is a construction veteran and said this is one tool that a carpenter shouldn't be without.Get more detail about Fein MultiMaster FMM 250Q Top.

Buy Fein MultiMaster FMM 250Q Top

My hubbie got this from Fein web site (FMM 250Q) and got it fast. However, we had missing parts (a cellopane wraped 3 blade combination of accessories) that should come with the kit. Called Fein and they were surprised that those were missing, but sent to us by UPS anyway without charges. Do not have 365/7/24 customer service, but people who picked up the phone are nice and professional.

Packaging is not as good as expected. After we took the tool out, we cannot put it back unless we took out those filmsy plastic packaging inside the tool box provided. They need better packaging design for such a high price tool.


Tool seem to be well made, but accessories are very expansive. For charging this kind of price, Fein should have included all accessories in the product.

For using, I am not strong enough to flip the handle to change the accessories. However, I like using it to cut wood board and pipes. My hubby has used this to cut sidings, trims and he used this to change sidings in the front portion of our house and he likes the tool. We are planning on using the MulitMaster to sand down the window trims for re-painting this coming year. We like using this tool for detail work and projects that are limited in space.

I understand that Dremmel and Rockwell has came out with similar product (even look the same), but at a lower price level, but I am not sure if the quality are as good as this one from Fein.

Overall, we like the tool, but think it is a bit costly, especially when you need to order additional accessories.
Get more detail about Fein MultiMaster FMM 250Q Top.

Purchase Fein MultiMaster FMM 250Q Top

This is a great multi tool, used it of some projects doing electrical additions, that use to take 30 min. With the Fein it took 2 minuites. Lent it to a friend while laying floor, he said it was great for working aournd the doors for easy cuts. Almost did not get my tool back! Just make sure you by the whole kit that come with everything.Get more detail about Fein MultiMaster FMM 250Q Top.

Cheap Fein MultiMaster FMM 250Q Top

I was looking for a corded oscillating tool and looked at the Fein Multitasker and blades, but it is just way too expensive to purchase for my needs. So I bought the Dremel and the Rockwell to compare side by side...

The $100 Dremel is lighter and a bit smaller but the buzz the motor makes compared to the Rockwell motor [a little bit heavier and slightly bigger] which humms smoothly is like comparing a Vespa scooter to a Victory street bike.

Since the basic Rockwell is only $20 more than the Dremel and the extra blades are about the same price, there was no question about going for the quality/durability of a Rockwell.

The only convenience problem that I can foresee is getting replacement blades:
Dremel is carried by big box hardware stores; hobbyists who do crafts on the spur of the moment and do not need to rip open walls, will appreciate the around-the-corner convenience.
Rockwell is carried by speciality woodworking stores or the internet; the Home Proj. kind of guys have to plan ahead before ripping into a wall for remodeling. So ordering parts in advance should be a no brainer.

I also really liked the Rockwell case, it is created with niches and screw-downs to hold lots of blades/attachments in place.

I looked at the Bosch 12v battery operated version, and that would have been a good choice but I do not want to have numerous 18v tool systems and chargers for the various power hand tools that I use. I read that the Bosch delivers 20 min of battery power and I might need more time than that between charges.

All four tools mentioned above have variable speeds pretty much the same: 10,000 - 21,000 opm. The Bosch details that I read boasted of 5,000 - 20,000 opm, but I do not know if I need to go that slow. If I did I would have researched more into the rare Praxon version of oscillating tool, which is reportedly underpowered and equivalent to size and weight of the Dremel.
Get more detail about Fein MultiMaster FMM 250Q Top.

Buying Fein MultiMaster FMM 250Q Top

Great product, replacement blades are expensive, take a little getting used to, but overall its great!Get more detail about Fein MultiMaster FMM 250Q Top.

Cheapest Fein MultiMaster FMM 250Q Top

I've owned the Fein Multimaster for about a month now, and use it in conjunction with the Turbo II vacuum. This is a convenient and aggressive tool. I held off purchasing it for several years because of the price but now I see that I could have used it for many purposes during my home remodel and could have used it more effectively than the sawzall for most, if not all, of the tasks for which I needed it. The sanding capacity alone will save you significant time and sweat. When I think back to all the sanding I did to the window frames while standing on a ladder I feel somewhat foolish. The vacuum attachment works quite well and is excellent when sanding. In conjunction with the HEPA filter, I cannot detect any airborne particles and there is no cleanup. Be careful when selecting which model to purchase. The new 'no-tool' feature is very nice and I'm glad I didn't buy the previous version that required a hex tool. Look carefully at the supplied items for each of the 3 levels available. The 'Top' version provides the best value and not all of them come with the case, which is somewhat of a necessity. I've read complaints about the case but it certainly seems adequate to me and I can shove a great amount of sandpaper and attachments into the 2 compartments and 1 miscellaneous storage area. You definitely want ear protection. I know the promo. videos show everyone happily using the Multimaster and even talking to each other while it is running, but at 85db+ you WILL damage your hearing. For those who don't need to act manly and go without protection, my standard is a set of silicone plugs combined with the Bilson Thunder T3 ear muffs.Get more detail about Fein MultiMaster FMM 250Q Top.

Save Fein MultiMaster FMM 250Q Top

Seems well-built. I've used the grout saw, the e-blade, the scraper and the segment blade. The e-blade and scraper were a little disappointing. The grout saw and segment blade worked great. I understand the sander works very well, too, but haven't tried that yet... The replacement blades seem a little over priced which is disappointing. I hope the tool pays for itself. Time will tell.Get more detail about Fein MultiMaster FMM 250Q Top.

Discount Fein MultiMaster FMM 250Q Top

This is the best tool I've found for remodeling anything around the house, it makes doing things like making holes in the wall a snap and for refinishing wood without taking it all apart.. would recommend highly to anyone with a lot of projects or professional carpenter who does remodeling.Get more detail about Fein MultiMaster FMM 250Q Top.

Low Price Fein MultiMaster FMM 250Q Top

My review will be just like most reviews of the Fein Multimaster. It's very expensive, the attachments are really expensive, but this tool does the job that other tools don't do. The first week I used it a half a dozen times. It really works, I'm glad I got, I wish the accessories were cheaper. Get more detail about Fein MultiMaster FMM 250Q Top.

Lowest Price Fein MultiMaster FMM 250Q Top

Does just what they say. I had to straighten a wall where it ended at a closet opening. I was able to cut the nails in about 20 sec, with no damage to the sheetrock where it mattered, as the molding covered it. The wall could then easily be pushed into the correct position and renailed. I was dreading doing this work so tried to hire someone. They were going to charge me $150 dollars and use a sledge. I learned long ago not to skimp on tools as the good ones last a lifetime. This tool is heavy but works so quickly it really doesn't matter. Get more detail about Fein MultiMaster FMM 250Q Top.

Fein MultiMaster FMM 250Q Top Right now

The Fein Multimaster handles every job with ease and precision. The bit changing process is very easy and holds the tool very solidly. I tried cutting wood, and 1/8 " aluminum , cutting holes for my car speaker sheet metal, and sanding. It does everything well, and cuts through sheet metal much easier than the rotozip or dremel with metal cutting disk.

When cutting sheet metal I've noticed that it doesn't give off that hot spark unlike most metal cutting tools.

It also sands really well when used properly which saves me a ton of time sanding.

It also has more power than I really need. I hardly use the maximum speed setting unless I'm cutting thick wood or metal.

This is a really nice product and it's worth every penny. Everyone should have one of these wether you're a car audio installer like myself, or a hobbyist. Get more detail about Fein MultiMaster FMM 250Q Top.